---
title: How to Prepare Your Site for a Crane Lift | Ranges Rigging
url: https://rangesrigging.com/guides/prepare-site-for-crane/
language: en-AU
updated: 2026-11-19
publisher: Ranges Rigging, 15 Selby Road, Woori Yallock VIC 3139, 0414 649 934
---

1. [Home](https://rangesrigging.com/)
2. [Guides](https://rangesrigging.com/guides/)
3. Preparing your site for a crane

Guide

# How to prepare your site *for a crane*

To prepare your site for a crane, clear the path the crane will take and the spot where the load is going, check for soft or backfilled ground, tell us about power lines and trees, move cars off the driveway and street, and have the load's weight ready. Send photos before the day and we'll plan the set-up.

By the Ranges Rigging team · Last updated 19 November 2026

[Call 0414 649 934](tel:+61414649934)[Get a quote](https://rangesrigging.com/contact/)

## When you book

- Get the load's weight and size from the supplier, builder or manufacturer.
- Send photos of the street, the driveway or gate, and where the load is going.
- Measure the narrowest point the crane has to pass, like a gate or a gap between buildings.
- Tell us if the crane may need to set up on the road, so we can sort a council permit.

## A few days before

- Make sure the slab, footings, stumps or stand are ready for the load.
- Let neighbours know if the street or a shared driveway will be busy.
- Trim or tie back branches that hang over the access path or the lift area, where you're allowed to.
- Tell us about septic tanks, pits, pipes or recent trenches under the access path.

## On the day

- Move cars, trailers and bins out of the driveway and off the street out the front.
- Clear the path and the drop zone of materials, toys and outdoor furniture.
- Keep pets and children inside and well away from the lift.
- Have someone on site who knows where the load is going.
- Stay clear of the crane and the load while it's moving. The operator and our riggers will run the lift.

## Ground and slopes

A pick and carry crane like our Franna is rated on firm, level ground. Safe Work Australia warns that a side slope of only 2 to 3 degrees can drastically affect its stability, and soft, wet or backfilled ground can give way under the wheels. Point out any soft spots, fresh fill, pits or tanks and we'll plan around them. If heavy rain or strong wind makes a lift unsafe, we'll talk to you about the safest option.

## Power lines and trees

Overhead lines are the biggest hazard on a residential lift. Energy Safe Victoria's No Go Zones mean work within 3 metres of distribution lines needs the network operator's permission, and work between 3 and 6.4 metres needs a registered spotter. Tell us about every line near the street, the house and the backyard. We arrange electrical spotting where it's needed.

## Quick checklist

Site preparation checklist

| Check | Why it matters |
| --- | --- |
| Load weight and size | Decides the crane and how far it can reach |
| Photos of street, access and drop spot | Lets us plan the set-up before the day |
| Clear path and drop zone | Keeps the lift quick and safe |
| Firm, level ground | A pick and carry crane is rated on firm, level ground |
| Power lines and trees noted | Sets the safe working distance and any spotter |
| Cars moved, neighbours told | Gives the crane and the truck room to work |
| Permit if the road is used | Councils need a permit when the crane uses the road or footpath |

## Sources

- [Safe Work Australia, General guide for cranes: mobile cranes](https://www.safeworkaustralia.gov.au/system/files/documents/1703/guide-to-mobile-cranes.pdf)
- [WorkSafe Victoria, Prevent pick and carry cranes from overturning](https://www.worksafe.vic.gov.au/prevent-pick-and-carry-cranes-overturning)
- [Energy Safe Victoria, Working around powerlines](https://www.energysafe.vic.gov.au/industry-guidance/electrical/electrical-network-infrastructure/working-around-powerlines)

This guide is general information to help you plan a lift. Permit names, fees and timeframes can change, so check the council page before you apply. For your job, call us on [0414 649 934](tel:+61414649934).

FAQ

## Questions people ask

### How much room does a Franna need?

It depends on the crane, the load and how far it has to reach. A Franna doesn't need outriggers, so it fits places other cranes can't, but it still needs a firm path in and room to lift. Send photos and measurements of the narrowest point and we'll check it before you book.

### Do I need to be home for the crane lift?

It's best to have someone on site who knows exactly where the load is going and can answer questions on the day. They need to stay clear of the crane and the load while it's moving. The operator and our riggers run the lift itself.

### What if it rains on the day?

Rain can make soft ground unsafe for a crane, and strong wind can stop a lift altogether. If the weather turns, we'll talk to you about the safest option before the day. Telling us about soft or backfilled ground when you book helps us plan around it.

### Do I need a permit for the crane?

Only if the crane, the truck or the load uses the road, footpath or nature strip. Then the council needs a permit first. We coordinate local council permits as part of the job. Read our crane permits guide for the permit each council in our area lists.

### Should I tell my neighbours?

Yes, if the street or a shared driveway will be busy. A quick heads up about the date and time helps them move cars and keeps the street clear for the crane and the truck. If traffic needs managing, we can facilitate traffic management for the lift.

## Related crane jobs

- [Pool and spa lifts](https://rangesrigging.com/pool-spa-crane-lifts/)
- [Tiny homes and demountables](https://rangesrigging.com/tiny-home-demountable-crane-hire/)
- [Shipping containers](https://rangesrigging.com/shipping-container-crane-hire/)
- [Machinery moving and rigging](https://rangesrigging.com/machinery-moving-rigging/)

## Where we work

- [Yarra Ranges and Yarra Valley](https://rangesrigging.com/service-areas/yarra-ranges/)
- [Dandenong Ranges](https://rangesrigging.com/service-areas/dandenong-ranges/)
- [Eastern suburbs](https://rangesrigging.com/service-areas/eastern-suburbs/)
- [South East](https://rangesrigging.com/service-areas/south-east/)

## More guides

- [Crane permits by council](https://rangesrigging.com/guides/crane-permits-melbourne/)
- [Pool, spa and tiny home lift costs](https://rangesrigging.com/guides/crane-lift-cost-pool-spa-tiny-home/)
- [Franna vs slew crane](https://rangesrigging.com/guides/franna-vs-slew-crane/)
- [All guides](https://rangesrigging.com/guides/)

## Planning a lift?

Send us photos and the load details and we'll tell you what's possible and quote the job.

[Call 0414 649 934](tel:+61414649934)[Get a quote](https://rangesrigging.com/contact/)

---
Ranges Rigging. Phone 0414 649 934. Email james@rangesrigging.com. 15 Selby Road, Woori Yallock VIC 3139. Servicing the Yarra Ranges, Melbourne and Outer East. Veteran owned and operated.
